Robledo, CB, Oldenbroek, V., Abbruzzese, F. & van Wijk, AJM. Hydrogen fuel cell electric vehicles and vehicle-grid technologies, photovoltaics and residential integration. Appl. Energy 215, 615–629 (2018).
Manoharan, Y. et al. Hydrogen fuel cell vehicles: current status and future prospects. Appl. Sci. (Switzerland) 9, 2296 (2019).
Moore, RM, Hauer, KH, Ramaswamy, S. & Cunningham, JM. Energy use and efficiency analysis of hydrogen fuel cell vehicles. J. Power Sources 159, 1214–1230 (2006).
Singla, MK, Nijhawan, P. & Oberoi, A.S. Hydrogen fuel and fuel cell technologies for a cleaner future: a review. Environ. Sci. Pollut. Res. 28, 15607–15626 (2021).
Mooraj, S. et al. 3D printing of metal-based materials for renewable energy applications. Nano Res. 14, 2105–2132 (2021).
Jayapiriya, US & Goel, S. Impact of cellulose separators in coin-sized 3D printed paper-based microbial fuel cells. Sustain. Energy Technol. Assess. 47, 101535 (2021).
Google Academic
Sürer, MG & Arat, HT “Progress and state of the art in marine hydrogen fuel cell applications” Int. J. Hydrogen Energy 47, 19865–19875 (2022).
Haseli, Y. Maximum conversion efficiency of hydrogen fuel cells. Int. J. Hydrogen Energy 43, 9015–9021 (2018).
Grady, C. et al. A design tool to estimate adsorptive hydrogen storage system performance for lightweight fuel cell vehicles. Int. J. Hydrogen Energy 47, 29847–29857 (2022).
Foorginezhad, S. et al., “Advances in sensing for safety assessment of hydrogen fuel cell vehicles,” J. Power Sources 489, 229450 (2021).
Evrin, RA & Dincer, I. Thermodynamic analysis and evaluation of an integrated hydrogen fuel cell system for marine applications. Int. J. Hydrogen Energy 44, 6919–6928 (2019).
Wang, Y. et al. Flexible paper-based hydrogen fuel cell for small power applications. Int. J. Hydrogen Energy 44, 29680–29691 (2019).
Esquivel, JP et al., “Disposable paper-based hydrogen fuel cells for point-of-care diagnostic applications,” J. Power Sources 342, 442–451 (2017).
Fu, YL et al. Pore-scale modeling of oxygen transport in the catalyst layer of air-breathing cathodes of membraneless microfluidic fuel cells. Appl. Energy 277, 115536. https://doi.org/10.1016/j.apenergy.2020.115536 (2020).
Tian, Y., Zou, Q. & Lin, Z. Hydrogen leak diagnosis in proton exchange membrane fuel cell systems: methods and proposals for fuel cell vehicle applications. IEEE Access 8, 224895–224910 (2020).
Li, X. et al. Vanadium-doped nickel cobalt phosphide as an efficient and stable electrocatalyst for hydrogen evolution reaction. J. Electroanal. Chem. 902, 115812 (2021).
Wu, T. et al. Hydrogen energy storage system for reducing demand forecast error and voltage stabilization at fast charging stations. IEEE Trans. Ind. Appl. 58, 2718–2727 (2022).
Pedersen, CM et al. Benchmarking Pt-based electrocatalysts for low-temperature fuel cell reactions using rotating disk electrodes: oxygen reduction and hydrogen oxidation in the presence of CO (review article). Electrochim. Acta 179, 647–657 (2015).
Jiang, Y., Wang, X., Zhong, L. & Liu, L. Design, fabrication, and testing of a silicon-based air-breathing micro direct methanol fuel cell. J. Micromech. Microeng. 16, S233–S239 (2006).
Ning, X., Zhou, X., Luo, J. & Zhan, L. PtBi on carbon cloth as an efficient flexible electrode for electro-oxidation of liquid fuels. J. Electroanal. Chem. 904, 115958 (2022).
Rao, LT, Rewatkar, P., Dubey, SK, Javed, A. & Goel, S. An automated pencil electrode formation platform for uniform and reproducible graphite electrodes on paper for microfluidic fuel cells. Sci. Rep. https://doi.org/10.1038/s41598-020-68579-x (2020).
Li, S., Cheng, C. & Thomas, A. Carbon-based microbial fuel cell electrodes: From conductive supports to active catalysts. Adv. Mater. https://doi.org/10.1002/adma.201602547 (2017).
Rewatkar, P., Enaganti, PK, Rishi, M., Mukhopadhyay, S. & Goel, S. Single-step inkjet printed paper origami array air-breathing microfluidic microbial fuel cell and its validation. Int. J. Hydrogen Energy 46, 35408–35419 (2021).
Rao, LT, Dubey, SK, Javed, A. & Goel, S. Metal-free Al-air microfluidic paper fuel cells for powering portable electronic devices. Int. J. Energy Res. 45, 7070–7081 (2021).
Wang, Y. et al. Printing aluminum-air batteries on paper to power disposable printed electronics. J. Power Sources 450, 227685 (2020).
Srikanth, S. et al. A droplet-based lab-on-a-chip platform integrated with laser-ablated graphene heaters for synthesizing gold nanoparticles for electrochemical sensing and fuel cell applications. Sci. Rep. https://doi.org/10.1038/s41598-021-88068-z (2021).
Cheekatamarla, PK & Finnerty, CM. Reforming catalysts for hydrogen production in fuel cell applications. J. Power Sources 160, 490–499 (2006).
Chen, Y. et al. Improving microbial fuel cell performance by modifying carbon cloth anode with MnO2/halloysite nanotubes. Energy 109, 620–628 (2016).
Wang, Y., Kwok, H., Pan, W., Zhang, H. & Leung, DYC. Innovative paper-based aluminum-air batteries as a low-cost, green energy technology for the mini-watt market. J. Power Sources 414, 278–282 (2019).
Jayapiriya, U.S. & Goel, S. A body-wearable enzymatic biofuel cell with automatic pencil-drawn bioelectrodes for energy harvesting from human sweat. J. Micromech. Microeng. https://doi.org/10.1088/1361-6439/ac537f (2022).
Peng, L. & Wei, Z. Catalyst engineering for water-to-water electrochemical energy conversion: water electrolysis and hydrogen fuel cells. Engineering 6, 653–679 (2020).
Liu, Y. et al. A comprehensive review of recent advances in aluminum-air batteries. Green Energy Environ. 2, 246–277. https://doi.org/10.1016/j.gee.2017.06.006 (2017).
Tang, J.M. et al., “High-performance hydrogen fuel cells with ultra-low Pt loading carbon nanotube thin film catalysts,” J. Phys. Chem. C 111, 17901–17904 (2007).
Awasthi, H., Renuka, H., Srivastava, AK & Goel, S. Laser-induced graphene-based flexible interdigital electrodes for sustainable micro-supercapacitors at different temperatures. Energy Stor. https://doi.org/10.1002/est2.405 (2023).
Tang, JM et al. High-performance hydrogen fuel cells with ultra-low Pt loading carbon nanotube thin film catalysts†. J. Phys. Chem. C 111, 17901–17904 (2007).
Vanmathi, S., Jayapiriya, U.S. & Goel, S. Miniature 3D printed carbon cloth based hydrogen fuel cell. (2022)
Reber, D., Kühnel, R.S., Battaglia, C. High-voltage aqueous supercapacitors based on NaTFSI. Sustain. Energy Fuels 1, 2155–2161 (2017).
Pattipaka, S. et al. “Nanoscale Surface Engineered Magneto-Mechanical Triboelectric Nanogenerators for Self-Powered IoT Devices Enabled by Reliable Pattern Replication” Sustain Energy Fuels https://doi.org/10.1039/d3se01206a (2024).
